EDUCATION AND EXPERIENCE

Degrees
Ph.D. Virginia Polytechnic Institute, 1969
M.S.I.E. Virginia Polytechnic Institute, 1967
B.S.I.E. Virginia Polytechnic Institute, 1965

Academic Experience
1988 - Present Professor of Industrial & Management Systems Engineering, Arizona State University.
1984 - 1988 John M. Fluke Distinguished Professor of Manufacturing Engineering, Director of Industrial Engineering, and
Professor of Mechanical Engineering, Department of Mechanical Engineering, University of Washington.
1978 - 1984 Professor, School of Industrial and Systems Engineering, Georgia Institute of Technology.
1972 - 1978 Associate Professor, School of Industrial and Systems Engineering, Georgia Institute of Technology.
1969 - 1972 Assistant Professor, School of Industrial and Systems Engineering, Georgia Institute of Technology.
1966 - 1969 Instructor, Department of Industrial Engineering and Operations Research, Virginia Polytechnic Institute.

Industrial Experience
1966 Manufacturing/Development Engineer, Eli Lilly, Inc. Creative Packaging Division.
1963 - 1964 Process Engineer, Union Carbide Corporation.

Professional Interests
Engineering statistics, including design and analysis of experiments, statistical methods for process monitoring and
optimization, and the analysis of time-oriented data. The application of statistics to industrial problems, including
engineering design, product and process development, and manufacturing.

Consulting Experience
Extensive consulting assignments involving projects with over 200 organizations. General area of professional experience
focused on engineering applications of statistics and operations research methods. Projects have involved design of
experiments and response surface methods, implementation of statistical process control, process development including
characterization and optimization, time series analysis and the design of forecasting systems, empirical model building,
and the design and analysis of physical distribution systems. Specific industry experience includes semiconductors and
electronics, medical devices, biotechnology, consumer products, chemical and process industries, aerospace, and the
service industries. Some consulting clients include Motorola, AT&T, Boeing, IBM, The Coca-Cola Company, Lucent
Technologies, Dial Corporation, Dow Chemical, Amoco, Georgia-Pacific, Monsanto Chemicals, Alcoa, and Eli Lilly.

HONORS AND AWARDS

Shewhart Medal, 1997. Awarded by the American Society for Quality Control.
Pritsker Award - Annual Teaching Award, Dept. of Industrial and Management Systems Engineering, Arizona State
University, 1997
William G. Hunter Award, 1996. Given by the Statistics Division of the American Society for Quality Control.
Brumbaugh Award, 1994. Given by the American Society for Quality Control for the best paper in a journal of the Society.

Distinguished Alumnus, Department of Industrial and Systems Engineering, Virginia Tech (Awarded 1994)
College of Engineering and Applied Sciences, Arizona State University, Teaching Excellence Award (Graduate), 1994
Pritsker Award - Annual Teaching Award, Dept. of Industrial and Management Systems Engineering, Arizona State
University 1994
Shewell Award, 1993. Given by the Chemical and Process Industries Division of the ASQC for the best technical paper at
the ASQC/ASA Fall Technical Conference, 1992
Anderson Teaching Award, Department of Industrial and Management Systems Engineering, Arizona State University,
1993
Ellis R. Ott Award, 1992. Given by the Ellis R. Ott Foundation for the best paper on quality engineering during a two-year
period
Pritsker Award - Annual Teaching Award, Dept. of Industrial and Management Systems Engineering, Arizona State
University, 1992
Engineer of the Year, 1987, Puget Sound Engineering Council
Industrial Engineer of the Year, 1986, Puget Sound Region Institute of Industrial Engineers
Alpha Pi Mu/AIIE Outstanding Teacher Award, School of ISyE, Georgia Tech, 1976-1977
Listed: Who's Who in the American South and Southwest, American Men and Women of Science, Who's Who in
Engineering
Phi Kappa Phi
Sigma Xi
Alpha Pi Mu
Mu Rho Sigma (Honorary Member, Va. Tech Chapter 1995)

PROFESSIONAL ACTIVITIES

Editor, Journal of Quality Technology, 1994-1997
American Society for Quality Control, Fellow
Chairman, Statistics Division, 1981-1982
Statistics Technical Committee, 1976-1979
Publications Management Board, 1977-1980, 1994-present
Secretary, PBM, 1979-1980
American Statistical Association, Fellow
Founding member, Committee on Statistics in Quality and Productivity
Advisory Board, Section on Physical and Engineering Sciences, 1981-1983.
The Institute of Industrial Engineers, Fellow
Region IV Chairman, Production Planning and Control Division, 1971-1972
Research and Publications Chairman, Production Planning and Control Division, 1972-1973
Director-Elect, Production Planning and Control Division, 1972-1973
National Director, Production Planning and Control Division, 1973-1974
Research Chairman, Production Planning and Control Division, 1975-1976
Advisory Board Member, Production Planning and Control Division, 1975-1976
Program Chairman, Quality Control and Reliability Division, 1975-1976
Region IV Chairman, Operations Research Division, 1974-1978
National Academy of Science, Committee on Applied and Theoretical Statistics, Panel on Research Needs in Statistical
Quality Control
Advisory Editor in Engineering, John Wiley & Sons, Inc., 1979-1983
Department Editor, Applied Probability and Statistics, IIE Transactions, 1980-1986.
Book Review Editor, Journal of Quality Technology, 1980-1982
Associate Editor, Naval Research Logistics Quarterly, 1982-1988
Associate Editor, Journal of Forecasting, 1981-1983
Associate Editor, Revue Francaise d'Automatique, d'Informatique et de Recherche Operationnelle, 1980-1991
Department Editor, Quality & Reliability Engineering, IIE Transactions, 1992-1994
Editorial Board Member, Journal of Quality Technology, 1980-1982, 1987-present
Editorial Board Member, Quality and Reliability Engineering International, 1994-present
Referee for various journals, including: Technometrics, Operations Research, Management Science, IIE Transactions,
Operational Research Quarterly, Journal of Quality Technology, Naval Research Logistics Quarterly, International Journal
Production Research, The American Statistician, American Institute of Chemical Engineers Transactions, Communications
in Statistics, Journal of Statistical Computation and Simulation, The Engineering Economist, Computers in Industrial
Engineering, Transportation Research, Journal of the American Statistical Association.
Technical manuscript reviewer for John Wiley and Sons, McGraw-Hill, Holden-Day, and Duxbury
Research Proposal Reviewer for the National Science Foundation, various divisions
Chairman and organizer of technical paper sessions at several conferences of IIE, ASQC, ORSA/TIMS, and the Winter
Simulation Conference
Co-chair for the 12th Annual Quality and Productivity Research Conference, Co-sponsored by ASU and Motorola
Semiconductor Products, May 17-19, 1995
Invited short course presenter at the Joint Statistical Meetings (1994), the ASQC/ASA Fall Technical Conference (1982,
1994, 1995, 1996), the U.S. Army Design of Experiments Conference (1994), and the Annual Conference on Applied
Statistics (1995).
Speaker for numerous local chapters of IIE, ASA, and ASQC, 1969-present
Participant in several seminar programs for international visitors to Georgia Tech, 1969-1984

SERVICE ACTIVITIES

Georgia Institute of Technology
Advisory Committee, School of ISyE, 1980-82
Chairman, Graduate Committee, School of ISyE, 1982-83
M.S. Comprehensive Exam Committee, School of ISyE, 1977-1978, 1982-1983
Undergraduate Curriculum Committee, School of ISyE, 1975-76
Chairman, M.S. Comprehensive Exam Committee, School of ISyE, 1974-1975
Research Evaluation Committee, School of ISyE, 1973-1974, 1974-1975
Computer Engineering Committee, College of Engineering, 1972
Chairman, Probability and Statistics Interest Group, 1971-1973
Chairman, Computers and Simulation Interest Group, 1971-1972
Computer Coordinator, School of ISyE, 1970-1971
Graduate Committee, School of ISyE, 1970-1973, 1977-1979
Arizona State University
Chair Search Committee, Industrial and Management Systems Engineering, 1993-94
Personnel Committee, 1988-present, Chairman 1996-97
Recruiting Committee, 1989-1993, 1996-97
Graduate Committee, 1996-present, Chairman 1996-97
Engineering College Core Committee, 1989-1991
Engineering College Graduate Committee, 1989-1993
Engineering College Bylaws Committee, 1995-present
University Council on Research and Creative Activities, 1995-present
Short Courses Taught (Georgia Institute of Technology)
Design of Production-Inventory Systems
Design of Experiments
Materials Handling
Simulation Techniques (academic administrator, 1973)
Industrial Engineering Review (P.E. Exam)
Traffic Engineering
Statistical Methods
Statistical Design and Analysis
Design and Analysis of Experiments (academic administrator, 1978-1984)
Applied Regression Analysis (academic administrator, 1978-1984)
Sampling Methods and Statistical Analysis in Power Systems Load Research (co-administrator, 1982-1984)
Short Courses Taught (University of Washington)
Applied Regression Analysis (academic administrator)
Design and Analysis of Experiments (academic administrator)
Statistical Process Control (academic administrator)
Process Optimization & Response Surfaces (academic administrator)
Short Courses Taught (Arizona State University)
Training the Trainer in Experimental Design
Introduction to Design of Experiments (also presented over NTU)
International Activities and Conference Participation
Invited speaker, Congress of the International Federation of Nonlinear Analysts, Athens, Greece, July, 1996.
Keynote Speaker, 8th Israeli Industrial Engineering Conference, Beer Sheva, Israel, 1994
Keynote Speaker, International Quality Forum, University of Texas El Paso, El Paso, Texas, 1992
Invited Speaker, Industrial Engineering Symposium, Monterey Institute of Technology, Monterey, Mexico 1991
Chairman, Regression Methodology Session, International Forecasting Symposium, Quebec, May 1981
Invited speaker, Symposium on Industrial Engineering, University of Regiomontana, Monterrey, Mexico, September 1980
Co-Chairman and organizer, Forecasting Session; 24th International TIMS Conference, Honolulu, Hawaii, June 1979
Consultant to Coca-Cola Export Corporation (includes: Coca-Cola Europe, Coca-Cola Latin America), 1974-1984
Invited speaker, Joint Meeting of Japan Operations Research Society, Japan Industrial Management Association, and
Kansai Institute for Information Systems, Osaka, Japan, August 1977
Invited speaker, 6th Management Science Colloquium, Osaka University, Japan, August 1977
Invited speaker, 23rd International Management Science Conference, Athens, Greece, July 1977
Invited speaker, 2nd Interamerican Conference on Systems and Information Engineering, Mexico City, November 1974
Visiting Professor of Engineering, Monterrey Institute of Technology, Monterrey, Mexico, spring quarter 1972;
co-sponsored by the organization of American States

FUNDED RESEARCH

"Research in Industrial Statistics" (projects/graduate student research) sponsored by various organizations including
Chrysler Electronics, Kellogg Corporation and the Dial Corporation, 1996-1997 (co-principal investigator), $105,000.
"Funding for Editorial Operation of JQT," ASQC, 1994-1997 (principal investigator) $315,000.
"Graduate Education in Engineering for Women and Minorities," NSF, 1992-1997 (co-principal investigator) $850,000.
"Process Control Methodology for the Hall Process," Alcoa, 1991 (principal investigator), $65,000.
"Implementation of Design of Experiments," Allied-Signal Aerospace, 1989 (principal investigator) $40,000.
"Statistical Methods for Quality and Process Improvement," IBM Corporation, 1985-1988 (principal investigator) $450,000.

"Process Control and Optimization Studies for Substrate Manufacturing," IBM Corporation, 1985 (principal investigator)
$67,000.
"Quality and Process Control in the Factory of the Future," Boeing Electronics Company, 1986 (principal investigator)
$25,000.
"Statistical Modeling and Analysis in Quality Assurance," Office of Naval Research, 1979-1985 (principal investigator)
$320,000.
"Determination of International Differences in Reported Fire Losses: Update and Extensions," National Fire Data Center,
U.S. fire Administration, 1981 (co-principal investigator) $50,000.
"Factor Screening Designs in Computer Simulation Experiments," Office of Naval Research, 1978 (principal investigator)
$25,000.
"Studies in Support of the Application of Statistical Methodology to the Design and Evaluation of Operational Tests,"
Department of the Army, Harry Diamond Laboratories, 1977 (co-principal investigator) $45,000.
"Studies in Support of the Application of Statistical Theory and Methodology to the Design and Evaluation of Operational
Tests," Department of the Army, Harry Diamond Laboratories, 1976 (co-principal investigator) $56,000.
"Research Support on Method-Model Development," U.S. Army Material Systems Agency, 1976 (co-principal investigator),
$15,000.
"Operational Testing of Complex Command and Control Systems," Department of the Army, Harry Diamond Laboratories,
1974-1975 (principal investigator), $15,000.

PUBLICATIONS

Books
1. Hines, W. W. and D. C., Montgomery (1990), Probability and Statistics in Engineering and Management Science, 3rd
edition, John Wiley & Sons, New York. (1st edition 1972, 2nd edition 1980).
2. Johnson, L. A. and D. C. Montgomery (1974), Operations Research in Production Planning, Scheduling, and Inventory
Control, John Wiley & Sons, New York.
3. Montgomery, D. C. (1997), Design and Analysis of Experiments, 4th edition, John Wiley & Sons, New York. (1st edition,
1976, 2nd edition, 1984, 3rd edition, 1991).
4. Montgomery, D. C. and E. A. Peck (1992), Introduction to Linear Regression Analysis, 2nd edition, John Wiley & Sons,
New York. (Probability and Statistics Series; 1st edition, 1983).
5. Montgomery, D. C. (1996), Introduction to Statistical Quality Control, 3rd edition, John Wiley & Sons, New York. (1st
edition, 1985, 2nd edition, 1991).
6. George, M. L., Gooch, J. and D. C. Montgomery (1986), America Can Compete, SMU Press, Dallas, TX.
7. Montgomery, D. C., Johnson, L. A. and J. S. Gardiner (1990), Forecasting and Time Series Analysis, 2nd edition,
McGraw-Hill, New York. (1st edition 1976).
8. Keats, J. B. and D. C. Montgomery (editors) (1991), Statistical Process Control in Manufacturing, Marcel Dekker, New
York.
9. Montgomery, D. C. and G. C. Runger (1994), Applied Statistics and Probability for Engineers, John Wiley & Sons, New
York.
10. Myers, R. H. and D. C. Montgomery (1995), Response Surface Methodology : Process and Product Optimization
Using Designed Experiments, John Wiley & Sons, New York (Probability and Statistics Series).
11. Keats, J. B. and D. C. Montgomery (editors) (1996), Statistical Applications in Process Control, Marcel Dekker, New
York.

Refereed Journal Publications
1. Montgomery, D. C. (1968), "An Introduction to Short-Term Forecasting," The Journal of Industrial Engineering, Vol. 11,
No. 10, this paper was also selected for inclusion in Mathematical Models in Marketing, by Robert G. Murdick,
International Textbook Co. (1971).
2. Montgomery, D. C. (1969), "An Application of Statistical Forecasting Techniques in an Inventory Control Policy,"
Production and Inventory Management, Vol. 10, No. 1.
3. Dickey, J. W. and D. C. Montgomery (1970) "A Simulation-Search Technique: An Example Application for Left-Turn
Phasing," Transportation Research, Vol. 4.
4. Montgomery, D. C. (1970), "Adaptive Control of Exponential Smoothing Parameters by Evolutionary Operation," AIIE
Transactions, Vol. 2, No. 3.
5. Ghare, P. M., D. C. Montgomery and W. C. Turner (1971), "Optimal Interdiction Policy for a Flow Network" Naval
Research Logistics Quarterly, Vol. 18, No. 1.
6. Montgomery, D. C. and P. J. Klatt (1972), "Minimum Cost Multivariate Quality Control Tests," AIIE Transactions, Vol. 4,
No. 2; this paper also appeared in Proceedings of the AIIE Annual Conference, Anaheim, California, June 1972.
7. Sipper, D. and D. C. Montgomery (1972), "Probability Zones in Stochastic Project Networks," Journal of Systems
Management, Vol. 23, No. 8.
8. Montgomery, D. C., J. J. Talavage and C. J. Mullen (1972), "A Response Surface Approach to Improving Traffic Signal
Settings in a Street Network," Transportation Research, Vol. 6.
9. Montgomery, D. C. and P. J. Klatt (1972), "Economic Design of T2 control Charts to Maintain Current Control of a
Process," Management Science, Vol. 19, No. 1.
10. Montgomery, D. C., M. S. Bazaraa and A. J. Keswani (1973), "Inventory Models with a Mixture of Backorders and Lost
Sales," Naval Research Logistics Quarterly, Vol. 20.
11. Horwitz, J. S. and D. C. Montgomery (1974), "A Computer Simulation Model of a Rubella Epidemic," Computers in
Biology and Medicine, Vol. 4, No. 2.
12. Heikes, R. G., D. C. Montgomery, and J. Young (1974), "Alternative Process Models in the Economic Design of T2
Control Charts," AIIE Transactions, Vol. 6, No. 1.
13. Montgomery, D. C., R. G. Heikes and J. F. Mance (1975), "Economic Design of Fraction Defective Control Charts,"
Management Science, Vol. 21, No. 11.
14. Heikes, R. G., D. C. Montgomery, and R. L. Rardin (1976), "Using Common Random Numbers in Simulation
Experiments--An Approach to Statistical Analysis," Simulation, Vol. 27, No. 3.
15. Montgomery, D. C. and R. G. Heikes (1976), "Process Failure Mechanisms and Optimal Fraction Defective Control
Charts," AIIE Transactions, Vol. 8, No. 4.
16. Montgomery, D. C. and L. E. Contreras (1977), "A Note on Forecasting with Adaptive Filtering," Operational Research
Quarterly, Vol. 28, No. 1.
17. Montgomery, D. C. (1977), "Discussion of 'Studies in a Simulated Job Shop'" by S. Eilon and I. Chowdhury, Invited
Discussion, Proceedings of the Institution of Mechanical Engineers, London, Vol. 189.
18. Montgomery, D. C. and V. M. Bettencourt (1977), Jr., "Multiple Response Surface Methods in Computer Simulation,"
Simulation, Vol. 29, No. 4.
19. Stewart, R. D., D. C. Montgomery and R. G. Heikes (1978), "Choice of Double Sampling Plans Based on Prior
Distributions and Costs," AIIE Transactions, Vol. 10, No. 1.
20. Montgomery, D. C. (1980), "The Economic Design of Control Charts: A Review and Literature Survey," Journal of
Quality Technology, Vol. 12, No. 2.
21. Montgomery, D. C. and R. G. Conard (1980), "Comparison of Simulation and Flight-Test Data for Missile Systems,"
Simulation, Vol. 31.
22. Montgomery, D. C., E. W. Martin and E. A. Peck (1980), "Interior Analysis of the Observations in Multiple Linear
Regression," Journal of Quality Technology, Vol. 12, No. 3.
23. Askin, R. G. and D. C. Montgomery (1980), "Augmented Robust Estimators," Technometrics, Vol. 22, No. 3.
24. Montgomery, D. C. and G. Weatherby (1980), "Modeling and Forecasting Time Series Using Transfer Function and
Intervention Methods," AIIE Transactions, Vol. 12, No. 4.
25. Montgomery, D. C. and R. G. Askin (1981), Problems of Nonnormality and Multicollinearity for Forecasting Methods
Based on Least Squares," AIIE Transactions, Vol. 13, No. 2.
26. Saniga, E. W. and D. C. Montgomery (1981), "Economical Quality Control Policies for a Single-Cause System," AIIE
Transactions, Vol.. 13, No. 3.
27. Montgomery, D. C. (1982), "Economic Design of an Control Chart," Journal of Quality Technology, Vol. 14, No. 2.
28. Montgomery, D. C. and L. Greene (1983), "Validation of Computer Simulation Models of Missile Systems," Journal of
Spacecraft and Rockets, Vol. 20, No. 3.
29. Askin, R. G. and D. C. Montgomery (1984), "An Analysis of Constrained Robust Regression Estimators," Naval
Research Logistics Quarterly, Vol. 31, No. 2.
30. Friedman, D. J. and D. C. Montgomery (1985), "Evaluation of the Predictive Performance of Biased Regression
Estimators," Journal of Forecasting, Vol. 4, No. 2.
31. Montgomery, D. C. (1985), "The Effect of Non-normality on Variables Sampling Plans," Naval Research Logistics
Quarterly, Vol. 32, No. 1.
32. Montgomery, D. C., Panagos, M., and R. G. Heikes (1985), "Economic Design of Control Charts for Two
Manufacturing Process Models," Naval Research Logistics Quarterly, Vol. 32. No. 4.
33. Montgomery, D. C. and R. H. Storer (1986), "Economic Models and Process Quality Control," Quality and Reliability
Engineering International, Vol. 2, No. 4.
34. Gardiner, J. S. and D. C. Montgomery (1987), "Using Statistical Control Charts for Software Quality Control," Quality
and Reliability Engineering International, Vol. 3, No. 1.
35. Gardiner, J. S., Friedman, D. J. and D. C. Montgomery (1987), "A Note on the Average Run Length of Cumulative
Sum Control Charts for Count Data," Quality and Reliability Engineering International, Vol. 3, No.1.
36. Montgomery, D. C. (1988), "Experiment Design for Product and Process Optimization," SAE Transactions, Fall
Volume.
37. Yourstone, S. A. and D. C. Montgomery (1989), "A Time-Series Approach to Discrete Real-Time Process Quality
Control," Quality and Reliability Engineering International, Vol. 5, No. 4.
38. Montgomery, D. C. (1990-91), "Using Fractional Factorial Designs for Robust Process Development," Quality
Engineering, Vol. 3, No. 2.
39. Yourstone, S. A. and D. C. Montgomery (1991), "Detection of Process Upsets-Sample Autocorrelation Control Chart
and Group Autocorrelation Control Chart Applications," Quality and Reliability Engineering International, Vol. 7.
40. Montgomery, D. C. and C. M. Mastrangelo (1991), "Some Statistical Process Control Methods for Autocorrelated
Data," (with discussion), Journal of Quality Technology, Vol. 23, No. 3.
41. Chua, M. K. and D. C. Montgomery (1991), "A Multivariate Quality Control Scheme," International Journal of Quality
and Reliability Management, Vol. 8, No. 6.
42. Hubele, N. F., D. C. Montgomery and W. H. Chin (1991 - 1992), "An Application of Statistical Process Control in
Jet-Turbine Engine Component Manufacturing," Quality Engineering, Vol. 4, No. 2.
43. Chua, M. K. and D. C. Montgomery (1992), "Investigation and Characterization of a Control Scheme for Multivariate
Quality Control," Quality and Reliability Engineering International, Vol. 8.
44. Montgomery, D. C. (1992), "The Use of Statistical Process Control and Design of Experiments in Product and
Process Development," IIE Transactions, Vol. 24, No. 5.
45. Coleman, D. E. and D. C. Montgomery (1993), "A Systematic Approach to Planning for a Designed Industrial
Experiment," (with discussion), Technometrics, Vol. 35, No. 1.
46. Montgomery, D. C. and D. J. Friedman (1993), "Prediction Using Regression Models with Multicollinear Predictor
Variables," IIE Transactions, Vol. 25, No. 3.
47. Runger, G. C. and D. C. Montgomery (1993), "Adaptive Sampling Enhancements for Shewhart Control Charts," IIE
Transactions, Vol. 25, No. 3.
48. Montgomery, D. C. and G. C. Runger (1993), "Gage Capability and Designed Experiments, Part I: Basic Methods,"
Quality Engineering, Vol. 6.
49. Montgomery, D. C. and G. C. Runger (1993), "Gage Capability and Designed Experiments, Part II: Experimental
Design Models and Variance Component Estimation," Quality Engineering, Vol. 6.
50. Del Castillo, E. and D. C. Montgomery (1993), "A Nonlinear Programming Solution to the Dual Response Problem,"
Journal of Quality Technology, Vol. 25, No. 3.
51. Del Castillo, E. and D. C. Montgomery (1993), "Optimal Design of Control Charts for Monitoring Short Production
Runs," Economic Quality Control, Vol. 8, No. 4.
52. Montgomery, D. C. and S. R. Voth (1994), "Multicollinearity and Leverage in Mixture Experiments," Journal of Quality
Technology, Vol. 26, No. 2.
53. Montgomery, D. C., J. B. Keats (1994), G. C. Runger, and W. S. Messina, "Integrating Statistical Process Control and
Engineering Process Control," Journal of Quality Technology, Vol. 26, No. 2.
54. Del Castillo, E. and D. C. Montgomery (1994), "Short-Run Statistical Process Control: Q-Chart Enhancements and
Alternatives," Quality and Reliability Engineering International, Vol. 10, No. 2.
55. Prabhu, S. S., D. C. Montgomery, and G. C. Runger (1994), "A Combined Adaptive Sample Size and Adaptive
Sampling Interval Control Scheme," Journal of Quality Technology, Vol. 26, No. 3.
56. Torng, James C., D. C. Montgomery and J. K. Cochran (1994), "Economic Design of the EWMA Control Chart,"
Economic Quality Control, Vol. 9, No. 1.
57. Heinsman, J. A. and D. C. Montgomery (1995), "Optimization of a Household Product Formulation Using a Mixture
Experiment," Quality Engineering, Vol. 7, No. 3.
58. Prabhu, S. S., D. C. Montgomery, and G. C. Runger (1995), "A Design Tool to Evaluate Average Time to Signal
Properties of Adaptive Control X-Bar Charts," Journal of Quality Technology, Vol. 27, No. 1.
59. Del Castillo, E. and D. C. Montgomery (1995), "A Kalman Filtering Process Control Scheme with an Application to
Semiconductor Short-Run Manufacturing," Quality and Reliability Engineering International, Vol. 11, No. 2.
60. Mastrangelo, C. M. and D. C. Montgomery (1995), "SPC with Correlated Observations for the Chemical and Process
Industries," Quality and Reliability Engineering International, Vol. 11, No. 2.
61. Montgomery, D. C., J. C-C. Torng, J. K. Cochran, and F. P. Lawrence (1995), "Economic Statistical Design of the
EWMA Control Chart," Journal of Quality Technology, Vol. 27, No. 2.
62. Torng, J. C-C., J. K. Cochran, D. C. Montgomery, and F. P. Lawrence (1995), "Implementing Economic Statistical
EWMA Control Charts," Journal of Quality Technology, Vol. 27, No. 2.
63. Annadi, H.P., J. B. Keats, G. C. Runger, and D. C. Montgomery (1995), "An Adaptive Sample Size CUSUM Control
Chart," International Journal of Production Research, Vol. 33, No. 6.
64. Grayson, J. M., G. C. Runger, and D. C. Montgomery (1995), "Average Run Length Performance of the U Chart with
Control Limits Based on the Average Sample Size," Quality Engineering, Vol. 8, No. 1.
65. Lowry, C. A. , and D. C. Montgomery (1995), "A Review of Multivariate Control Charts," IEE Transactions, Vol. 27, No.
6.
66. Del Castillo, E. and D. C. Montgomery (1996), "A General Model for the Optimal Economic Design of Charts Used to
Control Short or Long Run Processes," IEE Transactions, Vol. 28, No. 3..
67. Del Castillo, E., P. Mackin, and D. C. Montgomery (1996), "Multiple Criteria Optimal Design of Control Charts," IIE
Transactions, Vol. 28, No. 6.
68. Scranton, R., G. C. Runger, J. B. Keats and D. C. Montgomery (1996), "Efficient Shift Detection Using Multivariate
EWMA Control Charts and Principal Components," Quality and Reliability Engineering International, Vol. 12, No. 3.
69. Cornell, J. A. and D. C. Montgomery (1996), "Fitting Models to Data: Interaction Versus Polynomial? Your Choice!",
Communications in Statistics-Theory and Methods, Vol. 25, No. 11.
70. Del Castillo, E., Montgomery, D. C., and D. R. McCarville (1996), "Modified Desirability Functions for Multiple
Response Optimization," Journal of Quality Technology, Vol. 28, No. 3.
71. Cornell, J. A. and D. C. Montgomery (1996), "Interaction Models as Alternatives to Low-Order Polynomials," Journal of
Quality Technology, Vol. 28, No. 2.
72. Mastrangelo, C. M., Runger, G. C. and D. C. Montgomery (1996) "Statistical Process Monitoring with Principal
Components," Quality and Reliability Engineering International, Vol. 12, No. 3.
73. Shumate, D. A. and D. C. Montgomery (1996), "Development of a TiW Plasma Etch Process Using a Mixture
Experiment and Response Surface Methodology," IEEE Transactions on Semiconductor Manufacturing, Vol. 9, No. 3.
74. Runger, G. C., Alt, F. A., and D. C. Montgomery (1996), "Contributors to a Multivariate Statistical Process Control
Signal", Communications in Statistics - Theory and Methods, Vol. 25, No. 10.
75. Montgomery, D. C. and G. C. Runger (1996), "Fold-Overs of 2k-p Resolution IV Designs," Journal of Quality
Technology, Vol. 28, No. 4.
76. Keats, J.B., Montgomery, D.C., Runger, G.C., and W.S. Messina (1996), "Feedback Control and Statistical Process
Monitoring", International Journal of Reliability, Quality and Safety Engineering, Vol. 3, No. 3.
77. Runger, G. C., Alt, F. B., and D. C. Montgomery (1996), "Controlling Multiple Stream Processes with Principal
Components," International Journal of Production Research, Vol. 34, No. 11.
78. Del Castillo, E., Grayson, J. M., Montgomery, D. C., and G. C. Runger (1996), "A Review of Statistical Process
Control Techniques for Short-Run Manufacturing Systems," Communications in Statistics-Theory and Methods, Vol. 25,
No. 11.
79. Rhoads, T. R., D. C. Montgomery, and C. M. Mastrangelo (1996), "A Fast Initial Response Scheme for the
Exponentially Weighted Moving Average Control Chart," Quality Engineering, Vol. 9, No. 2..
80. Somerville, S. E. and D. C. Montgomery (1996), "Process Capability Indices and Nonnormal Distributions," Quality
Engineering, Vol. 9, No. 2.
81. McCarville, D. R., and D. C. Montgomery (1996), "Optimal Guard Bands for Gauges in Series," Quality Engineering,
Vol. 9, no. 2.
82. Kennedy, D. J., Montgomery, D. C., and Quay, B. H. (1996), "Stochastic Environmental Life Cycle Assessment
Modeling", International Journal of Life Cycle Assessment, Vol. 1, No. 4.
83. Simpson, J.R., and Montgomery, D. C. (1996), "A Biased-Robust Regression Technique for the Combined
Outlier-Multicollinearity Problem", Journal of Statistical Computation and Simulation, Vol. 56.
84. Montgomery, D. C., and Woodall, W. H. (1997) (editors), "A Discussion on Statistically-Based Process Monitoring and
Control", Journal of Quality Technology, Vol. 29, No. 2.
85. Lawson, C., Keats, J. B., and Montgomery, D. C. (1997), "Comparison of Robust and Least Squares Regression in
Computer-Generated Probability Plots", IIE Transactions on Reliability, Vol. 46, No. 1.

Papers Accepted for Publication
1. Prabhu, S. S., Montgomery, D. C., and G. C. Runger, "Economic-Statistical Design of an Adaptive Control Chart",
International Journal of Production Economics
2. Schaub, D. A., and D. C. Montgomery, "Using Experimental Design to Optimize the Stereolithography Process",
Quality Engineering
3. Prabhu, S. S., Runger, G. C., and D. C. Montgomery, "Selection of the Subgroup Size and Sampling Interval for a
CUSUM Control Chart", IIE Transactions
4. Montgomery, D. C., Borror, C. M., and J. D. Stanley, "Some Cautions in the Use of Plackett-Burman Designs", Quality
Engineering
5. Runger, G.C., and Montgomery, D.C., "Multivariate and Univariate Process Control: Geometry and Shift Directions",
Quality and Reliability Engineering International
6. Andere-Rendon, J., Montgomery, D. C., and Rollier, D. A., "Design of Mixture Experiments Using Bayesian
D-Optimality", Journal of Quality Technology.
7. Myers, R. H., and Montgomery, D. C., "A Tutorial on Generalized Linear Models", Journal of Quality Technology
8. Montgomery, D. C., Keats, J. B., Fowler, J. W., Runger, G. C., and Rajavelu, G., "Statistical Monitoring Techniques for
Contamination Data", Journal of the Institute of Environmental Sciences
9. Montgomery, D. C., Peck, E.A., and Simpson, J.R., "Multicollinearity and Biased Estimation in Regression", to appear in
the Handbook of Statistical Methods for Engineers and Physical Scientists, edited by H.M. Wadsworth, Jr., McGraw-Hill
10. Zimmer, L. S., Montgomery, D. C., and Runger, G.C., "Evaluation of a Three-State Adaptive Sample Size X-Bar
Control Chart", International Journal of Production Research
11. Bowles, M.L., and Montgomery, D.C., "How to Formulate the Ultimate Margarita: A Tutorial on Experiments with
Mixtures", Quality Engineering

Chapters in Books
1. Johnson, L. A. and D. C. Montgomery (1978), "Production and Inventory Control," The Encyclopedia of Computer
Science and Technology, Vol. 10, Marcel Dekker, New York.
2. Johnson, L. A. and D. C. Montgomery (1979), "Forecasting with Exponential Smoothing and Related Methods,"
Forecasting, Vol. 12, TIMS Studies in the Management Sciences, North-Holland, Amsterdam.
3. Montgomery, D. C. and D. J. Friedman (1989), "Statistical Process Control in a Computer-Integrated Manufacturing
Environment," Statistical Process Control in Automated Manufacturing, J. B. Keats and N. F. Hubele, editors, Marcel
Dekker, New York.
4. Montgomery, D. C. and E. A. Peck (1990), "Multicollinearity in Regression," Handbook of Statistical Methods for
Engineers, McGraw-Hill Book Co., H.M. Wadsworth, Jr., editor, McGraw-Hill, New York.
5. Montgomery, D. C. (1991), "Analyzing Location and Dispersion Effects from Designed Experiments: Same Examples,"
Statistical Process Control in Manufacturing, J. B. Keats and D. C. Montgomery, editors, Marcel Dekker, New York.
6. Messina, W. S., Montgomery, D. C., Keats, J. B. and G. C. Runger (1996), "Strategies for Statistical Monitoring of
Integral Control for the Continuous Process Industries," in Statistical Applications in Process Control, edited by J. B. Keats
and D. C. Montgomery, Marcel Dekker, New York.
7. Montgomery, D. C. (1996), "Some Practical Guidelines for Designing an Industrial Experiment," in Statistical
Applications in Process Control, edited by J. B. Keats and D. C. Montgomery, Marcel Dekker, New York.
8. Montgomery, D. C. and G. C. Runger (1996), "Experimental Design Models with Random Components," in Statistical
Applications in Process Control, edited by J. B. Keats and D. C. Montgomery, Marcel Dekker, New York.
9. McCarville, D. R. and D. C. Montgomery (1996), "Optimizing Defect Levels and Losses from Gage Errors," in Statistical
Applications in Process Control, edited by J. B. Keats and D. C. Montgomery, Marcel Dekker, New York.
10. Mastrangelo, C. M. and D. C. Montgomery (1996), "Time Series Analysis," Encyclopedia of Operations Research and
Management Science, Kluwer Academic Publishers, Norwell, MA
Papers in Conference Proceedings

1. Montgomery, D. C. (1971), "Stochastic Capacity Decision Models for Production Facilities," Proceedings of the AIIE
Annual Conference, Boston, MA.
2. Ghare, P. M. and D. C. Montgomery (1970), "Flow Management in Transportation Networks," Proceedings of the Fifth
International Conference on Operations Research, Venice, Italy, June 1969, Tavistock Publishers, Ltd..
3. Montgomery, D. C. and H. M. Wadsworth (1972), "Some Techniques for Multivariate Quality Control Applications,"
Transactions of the ASQC, Washington, D.C.
4. Marsh, J. D. and D. C. Montgomery (1973), "Optimal Procedures for Scheduling Jobs with Sequence-Dependent
Changeover Times on Parallel Processors," Proceedings of the AIIE Annual Conference, Chicago, IL.
5. Johnson, L. A. and D. C. Montgomery (1974), "On Dynamic Production Planning Models," Proceedings of the
Southeast IDS Meeting, New Orleans, LA.
6. Montgomery, D. C., J. F. Mance and R. G. Heikes (1974), "An Economic Model of the Fraction Defective Control Chart
with Multiple Assignable Causes," Transactions of the ASQC, Boston, MA.
7. Brown, E. L. and D. C. Montgomery (1975), "An Application of Network Simulation to Operational Testing and
Evaluation," Proceedings of the 14th Annual U.S. Army Operations Research Symposium, Ft. Lee, VA., November.
8. Friese, W. F., Jr., and D. C. Montgomery (1977), "A Cost-Optimal Approach to Selecting a Fractional Factorial Design,"
Proceedings of the 16th Annual U.S. Army Operations Research Symposium, Ft. Lee, VA.
9. Russ, S. W., Jr., D. C. Montgomery, and H. M. Wadsworth, Jr., (1977) "A Cost Optimal Approach to Selection of
Experimental Designs for Operational Testing Under Conditions of Constrained Sample Size," Proceedings of the 16th
Annual U.S. Army Operations Research Symposium, Ft. Lee, VA.
10. Simms, E. D. and D. C. Montgomery (1977), "The Use of Discriminant Analysis for Risk Assessment in Operational
Testing," Proceedings of the 16th Annual U.S. Army Operations Research Symposium, Ft. Lee, VA.
11. Montgomery, D. C. and G. Weatherby (1979), "Factor Screening Methods in Computer Simulation," Proceedings of
the Winter Simulation Conference, San Diego, CA.
12. Montgomery, D. C. and E. A. Peck (1980), "The Multicollinearity Problem in Regression," Proceedings of the
Southeast Decision Sciences Conference, Orlando, FL.
13. Montgomery, D. C. (1981), "Cost Based Acceptance Sampling Plans and Process Control Schemes," Proceedings of
the AIIE Fall Conference, Washington, D. C.
14. Montgomery, D. C., Heikes, R. G., and M. R. Scheffler (1981), "Probability Models for the Occurrence of Defects,"
Frontiers in Statistical Quality Control, H. J. Lenz, G. B. Wetherill and P.Th. Wilrich, Editors, Physica-Verlag, Vienna.
15. Montgomery, D. C. (1983), "Statistical Consulting: Some Comments on Training of Statisticians," Proceedings of the
SAS Users Group International, New Orleans, LA.
16. Montgomery, D. C. (1984), "Biased Estimation and Robust Regression," Proceedings of the American Association of
Physicists in Medicine Midyear Topical Symposium, Mobile, AL.
17. Montgomery, D. C., Gardiner, J. S., and B. A. Pizzano (1987), "Statistical Process Control Methods for Detecting Small
Process Shifts," Frontiers in Statistical Quality Control, H. J. Lenz et al., editors, Physica-Verlag, Heidelberg.
18. Montgomery, D. C. (1989), "Rational Subgroups and Control Charts," Proceedings of the Arizona State University
Conference on Statistical Control and Design, Tempe, AZ.
19. Montgomery, D. C. (1991), "Experimental Design in Engineering Design and Development," Proceedings of the SAS
Users Group International, New Orleans, LA.
20. Montgomery, D. C. and C. M. Mastrangelo (1991), "Basic Properties of the EWMA," Proceedings of the Arizona State
University Conference on Statistical Control and Design, Tempe, AZ.
21. Montgomery, D. C. (1992), "Some Problems in Computer-aided Design of Experiments," Proceedings of the SAS
Users Group International Honolulu, HI.
22. Lowry, C. A. and D. C. Montgomery (1992), "Multivariate Quality Control: Review and Enhancement," Proceedings of
the Institute for Decision Sciences Conference, San Francisco, CA..
23. Montgomery, D. C., C. M. Mastrangelo, and C. A. Lowry (1993), "Statistical Process Monitoring for Dynamic Systems,"
Proceedings of the Industrial Engineering Research Conference, San Francisco, CA.
24. Montgomery, D. C., and J. E. Taggart (1993), "Selection of a Second Order Response Surface Design," Proceedings
of the SAS Users Group International, New York, NY.
25. Mastrangelo, C. M., and D. C. Montgomery (1994), "Shift Detection Properties of Moving-Centerline EWMA Control
Schemes", Proceedings of the Industrial Engineering Research Conference, Atlanta, GA.
26. Montgomery, D. C. (1994), "Strategies for Integrating Statistical Process Control and Engineering Process Control",
Proceedings of the Rutgers Conference on Computer Integrated Manufacturing in the Process Industries, Piscataway, NJ.

27. Myers, R. H. and D. C. Montgomery (1994), "Robust Design and Response Surface Methodology," Proceedings of the
50th Conference on Applied Statistics, Atlantic City, NJ.
28. Montgomery, D. C. and M. L. Bowles (1995), "Multiple Response Optimization Methods," Proceedings of the Annual
Conference on Applied Statistics, Atlantic City, NJ.
29. Montgomery, D. C., Keats, J. B., and G. Rajavelu (1996), "Statistical Monitoring Techniques for Contamination Data,"
Institute of Environmental Sciences-Proceedings, Orlando, Fl.
30. Rhoads, T. R. and D. C. Montgomery (1996), "Process Monitoring with Principal Components and Partial Least
Squares," Proceedings of the Industrial Engineering Research Conference, Minneapolis, MN.

Papers Presented at Meetings
1. Montgomery, D. C. (1970), "Evolutionary Operation and Machine Center Capacity Control in Job-Shop Systems,"
contributed paper presented at the 11th American Meeting of TIMS, Los Angeles, California.
2. Ghare, P. M. and D. C. Montgomery (1969), "Flow Management in Transportation Networks," invited paper presented
at the 5th International Conference on Operations Research, Venice, Italy, also in Conference Proceedings.
3. Fabrycky, W. J., V. Chachra and D. C. Montgomery (1970), "A Simulation Study of Three Classes of Job-Shop
Sequencing Rules," invited paper presented at the 13th International Meeting of APICS, Cincinnati, Ohio.
4. Montgomery, D. C. (1970), "Expectations of Young Engineers from Their Employers and Professional Societies,"
invited paper presented at the 13th International Meeting of APICS, Cincinnati, Ohio.
5. Montgomery, D. C. (1971), "Stochastic Capacity Decision Models for Production Facilities," invited paper presented at
the AIIE Annual Conference, Boston, Massachusetts, also in Conference Proceedings.
6. Montgomery, D. C. and H. M. Wadsworth (1972), "Some Techniques for Multivariate Quality Control Applications,"
invited paper presented at the American Society for Quality Control Annual Conference, Washington, D.C., also in
Conference Proceedings.
7. Montgomery, D. C. and P. J. Klatt (1972), "Minimum Cost Multivariate Quality Control Tests," invited paper presented
at the AIIE Annual Conference, Anaheim, California, also in Conference Proceedings and subsequently published in AIIE
Transactions.
8. Montgomery, D. C. and D. M. Evans (1972), "Second Order Response Surface Designs in Digital Simulation," invited
paper presented at the 41st National ORSA Meeting, New Orleans, Louisiana, a revised version of this paper was
subsequently published in Simulation.
9. Marsh, J. D and D. C. Montgomery (1973), "Optimal Procedures for Scheduling Jobs with Sequence-Dependent
Changeover Times on Parallel Processors," invited paper presented at the AIIE Annual Conference, Chicago, Illinois.
10. Alt, F. B., J. J. Goode, D. C. Montgomery and H. M. Wadsworth (1973), "Variable Control Charts for Multivariate
Data," invited paper presented at the American Statistical Association Meeting, New York.
11. Heikes, R. G., D. C. Montgomery and J. Young (1973), "Alternate Process Models in the Economic Design of T2
Control Charts," presented at the 44th National ORSA Meeting, San Diego, California, subsequently published in AIIE
Transactions.
12. Montgomery, D. C. and C. K. Hudson (1973), "Use of Equiradial Designs in Response Surface Methodology,"
presented at the 44th National ORSA Meeting, San Diego, California.
13. Johnson, L. A. and D. C. Montgomery (1974), "On Dynamic Production Planning Models," invited paper presented at
the Distinguished Scholars Seminar, Southeast Institute of Decision Sciences Meeting, New Orleans, Louisiana, also in
Conference Proceedings.
14. Marsh, J. D. and D. C. Montgomery (1974), "Scheduling Jobs with Sequence Dependent Setup Times on Parallel
Machines," presented at the 45th National ORSA Meeting, Boston, Massachusetts.
15. Montgomery, D. C. (1974), "Experimental Design Techniques for Computer Simulation," invited paper at the Second
Interamerican Conference on Information and Systems Engineering, Mexico City.
16. Cummings, J. M., B. B. McCra, D. C. Montgomery and R. G. Heikes (1974), "Repairing Response Surface Designs to
Minimize Bias," presented at the 46th National ORSA Meeting, San Juan, Puerto Rico.
17. Montgomery, D. C., R. G. Heikes, and Y. G. Yap (1975), "A Comparison of Two Adaptive Forecasting Systems,"
presented at the 47th National ORSA Meeting, Chicago, Illinois.
18. Gearing, D. V., R. G. Heikes and D. C. Montgomery (1975), "Development of an Economic Model of Moving Average
Control Charts," presented at the Fall 1975 ORSA/TIMS National Meeting, Las Vegas.
19. Johnson, L. A. and D. C. Montgomery (1975), "Planning Lot Size Production for Inventory," invited paper presented at
the Fall ORSA/TIMS National Meeting, Las Vegas.
20. Johnson, L. A. and D. C. Montgomery (1975), "Forecasting and Time Series Analysis," seminar presented at the 3rd
Annual AIIE Fall Systems Engineering Conference, Las Vegas.
21. Brown, E. L. and D. C. Montgomery (1975), "An Application of Network Simulation to Operational Testing and
Evaluations," presented at the 14th Annual U.S. Army Operations Research Symposium, Ft. Lee, Virginia, also in
Conference Proceedings.
22. Montgomery, D. C. and V. M. Bettencourt, Jr. (1976), "A Review of Multiple Response Surface Methods in Computer
Simulation," invited paper presented at the Fall ORSA/TIMS National Meeting, Miami, Florida.
23. Johnson, L. A. and D. C. Montgomery (1977), " Forecasting with Prediction Limits," invited paper presented at the
23rd International TIMS Conference, Athens, Greece.
24. Montgomery, D. C. (1977), "Procedures for Optimizing and Integrating Production and Distribution Operations,"
invited paper presented at the 6th Management Science Colloquium, Osaka University, Osaka, Japan.
25. Friese, W. F., Jr., and D. C. Montgomery (1977), "A Cost-Optimal Approach to Selecting a Fractional Factorial
Design," presented at the 16th Annual U.S. Army Operations Research Symposium, Ft. Lee, Virginia, also in Conference
Proceedings.
26. Russ, S. W., Jr., D. C. Montgomery, and H. M. Wadsworth, Jr. (1977), "A Cost Optimal Approach to Selection of
Experimental Designs for Operational Testing Under Conditions of Constrained Sample Size," Presented at the 16th
Annual U.S. Army Operations Research Symposium, Ft. Lee, Virginia.
27. Simms, E. D. and D. C. Montgomery (1977), "The Use of Discriminant Analysis for Risk Assessment in Operational
Testing," Presented at the 16th Annual U.S. Army Operations Research Symposium, Ft. Lee, Virginia.
28. Johnson, L. A. and D. C. Montgomery (1979), "Forecasting Methods in Production and Operations Management,"
invited paper presented at the 24th International TIMS Conference, Honolulu, Hawaii.
29. Montgomery, D. C. (1979), "Methods for Combining Forecasts," presented at the 24th International TIMS
Conference, Honolulu, Hawaii.
30. Montgomery, D. C. and G. Weatherby (1979), "Factor Screening Methods in Computer Simulation," presented at the
Winter Simulation Conference, San Diego, Calif., also in Conference Proceedings.
31. Montgomery, D. C. and E. A. Peck (1981), "The Multicollinearity Problem in Regression," invited tutorial session at
the Southeast Institute for Decision Sciences Meeting, Orlando, Florida, February 1980; also in Conference Proceedings.
32. Montgomery, D. C. (1981), "Regression Analysis - Some Aspects of its Use in Load Research," invited paper given at
the AEIC Load Research Conference, Atlanta, Georgia.
33. Montgomery, D. C. (1981), "Cost Based Acceptance Sampling Plans and Process Control Schemes," invited paper
presented at the AIIE Fall Technical Conference, Washington, D. C., also in Conference Proceedings.
34. Montgomery, D. C. (1982), "Some Hazards of Using Regression Analysis as a Statistical Tool for Load Research,"
invited paper given at the AEIC Load Research Conference, Atlanta, Georgia.
35. Montgomery, D. C. and D. Friedman (1982), "An Evaluation of Biased Estimators for Prediction," invited paper given
at the Joint Statistical Meetings, Cincinnati, Ohio.
36. Montgomery, D. C. (1983), "The Effect of Nonnormality on Acceptance Sampling Plans for Variables," presented at a
Meeting of the National Academy of Science, Washington, D.C.
37. Montgomery, D. C. and F. D. Baker (1983), "Statistical Modeling of Soybean Growth," Workshop on Crop Simulation,
University of Illinois, Urbana-Champaign, Illinois.
38. Montgomery, D. C. (1984), "Sampling Procedures for Monitoring Service Contracts," invited paper given at the Spring
ORSA Meeting, San Francisco, Calif.
39. Montgomery, D. C. (1984), "Improving Quality and Productivity in Manufacturing with Design of Experiments," invited
presentation at the 10th Annual IBM Design of Experiments Conference, Lexington, Kentucky.
40. Montgomery, D. C. (1984), "Design of Experiments in Development and Manufacturing Engineering," invited
presentation at the 3rd Annual IBM Corporate Quality Conference, Austin, TX.
41. Montgomery, D. C. (1984), "Economic Models and Statistical Process Control," invited presentation at the Joint
Statistical Meetings, Philadelphia, PA.
42. Montgomery, D. C. and C. M. Mastrangelo (1990)

Back to top